APRILIA SHIVER 900 User Manual

Installing the crankshaft
•
Place the left side crankcase half on
the engine support adequately.
•
Place the crankshaft on the seat of the
crankcase half with caution.
Refitting the crankcase halves
•
In order to reposition the guards, repeat the procedure described in the section "OPENING
THE GUARDS" in reverse order.
CAUTION
TAKE CARE NOT TO MAKE EXCESSIVE USE OF THREEBOND AS THIS COULD PREVENT THE
OIL FROM PASSING BETWEEN THE GUARDS.
CAUTION
ENSURE THAT THE AL GUARDS ARE POSITIONED AS PERPENDICULARLY AS POSSIBLE, IN
ORDER TO AVOID DAMAGING THE MAIN HALF BEARINGS.
See also
Splitting the
crankcase halves
Lubrication
Engine SHIVER 900
ENG - 274

APRILIA SHIVER 900 Specifications

General

Displacement	896.1 cc
Transmission	6-speed
Rear Brakes	240 mm disc, single-piston caliper
Engine Type	V-Twin, 4-stroke
Power	70 kW (95.2 hp) @ 8, 750 rpm
Torque	90 Nm at 6, 500 rpm
Fuel System	Electronic fuel injection
Front Suspension	Inverted fork with adjustable preload and rebound damping
Rear Suspension	Aluminum swingarm with adjustable rebound and preload
Front Brakes	Dual 320 mm discs, radial 4-piston calipers
ABS	Standard
Traction Control	Adjustable traction control
Ride Modes	Sport, Touring, Rain
Seat Height	810 mm
Wheelbase	1, 460 mm
Fuel Capacity	15 liters
Dry Weight	199 kg (439 lbs)