Seats and head restraints
Adjusting the headrests
Fig. 101
Front seat: headrest adjustment.
Fig. 102
Rear headrest: headrest adjustment.
Adjusting the height of the head restraints
●
Grab the sides of the head restraints with
both hands and push up
w
ards to the desired
position. To lower it, repeat the same action,
pressing the button on the side
1
›››
Fig. 101
›
››
Fig. 102 .
●
The head r
estraint must lock correctly in
one position.
Removing and fitting the headrests
Fig. 103
Rear headrest: removal.
Removing and fitting the front headrests
●
Move the head restraint upwards until it ar-
riv
es t
o the top.
●
Press the side button
›››
Fig. 101
1
and
r
emo
ve the headrest.
●
To refit, insert the headrest into the holes
in the backrest, pushing it down until it en-
gages.
Removing the rear head restraints
To remove the head restraint, the corre-
sponding backrest must be partially folded
forward.
●
Unlock the backrest
›››
page 131 .
●
Move the head restraint upwards until it ar-
rives to the top.
●
Press button
›››
Fig. 103
1
, while simulta-
neously pr
essing on the securit
y hole
2
with
a flat scr
e
wdriver a maximum of 5 mm wide,
and remove the headrest.
●
Move the backrest until it engages properly
›››
in Folding down and raising the rear
se
at backr
est on page 132.
Fitting the rear head restraints
To mount the external head restraints, the
corresponding backrest must be partially fol-
ded forward.
●
Unlock the backrest
›››
page 131 .
●
Insert the head restraint bars into the
guides until they perceptibly engage. It
should not be possible to remove the head
restraint from the backrest.
●
Move the backrest until it engages properly
›››
in Folding down and raising the rear
se
at backr
est on page 132.
WARNING
Remove the rear headrests only when it is
necessary to fit a child seat. After removing
a child seat, refit the headrest immediately.
129
To Next Page
Loading...
Need help?
General
