EasyManuals Logo

Cupra FORMENTOR User Manual

Cupra FORMENTOR
388 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #153 background imageLoading...
Page #153 background image
Air conditioning
iClimate submenu
Submenu wher
e diff
erent smart and/or au-
tomatic functionalities are located:
Warm hands: automatically adjusts for a
certain time the air conditioning to heat
the steering wheel area.
Cool feet: automatically adjusts for a
certain time the air conditioning to cool
the footwell area.
Defog the windows: automatically ad-
justs for a certain time the air condition-
ing to defog the windscreen.
Warm feet: automatically adjusts for a
certain time the air conditioning to heat
the footwell area.
Fresh Air: automatically adjusts the air
conditioning for a certain time to venti-
late the passenger compartment.
AirCare Climate submenu
The air conditioning system contains a filter
that can reduce the penetration of allergenic
contaminants.
When the Air Care function is activated, the
recirculation mode is on and the air is regula-
ted automatically and continuously, as long
as there is no detection of fogging hazard.
Press on to activate/deactivate the
AirCare function.
Press to access the information on the
status of the AirCare system.
Settings submenu
Submenu where the following settings are
located:
Automatic recirculation: to switch auto-
matic air recirculation on and off
page 152.
Climaprofile: To adjust the fan speed (low,
medium or high) during operation in 
mode.
Climate control usage instructions
The interior cooling system only works when
the engine is running and f
an is s
witched on.
Economic use of the air conditioning
When the air conditioning is switched on,
the compressor consumes engine power
and has influence on fuel consumption.
The air conditioning operates most effec-
tively with the windows and the sunroof*
closed. However, if the passenger compart-
ment has heated up after standing in the sun
for some time, the air inside can be cooled
more quickly by briefly opening the windows
and the sunroof*.
Change the temperature unit (Climatron-
ic)
The temperature display can be changed
from Celsius to Fahrenheit on the Infotain-
ment system screen using the function but-
ton > Settings > Units.
The cooling system cannot be activated
If the air conditioning system cannot be
switched on, this may be caused by the fol-
lowing:
The engine is not running.
The fan is switched off.
The air conditioner fuse has blown.
The outside temperature is lower than ap-
proximately +3°C (+38°F).
The air conditioner compressor has been
temporarily switched off because the engine
coolant temperature is too high.
Another fault in the vehicle. Have the air
conditioner checked by a specialised work-
shop.
Special characteristics
If the humidity and temperature outside the
vehicle are high, condensation can drip off
the evaporator in the cooling system and
form a pool underneath the vehicle. This is
normal and does not indicate a leak!
»
151

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cupra FORMENTOR and is the answer not in the manual?

Cupra FORMENTOR Specifications

General IconGeneral
BrandCupra
ModelFORMENTOR
CategoryAutomobile
LanguageEnglish

Related product manuals