Driving
Light indication
The contr
ol lamp pr
ovides an indication on
the corresponding side regarding the traffic
situation behind the vehicle, if it is deemed
to be critical. The control lamp of the left-
hand side
›››
Fig. 165 indicates the traffic sit-
uation to the rear left of the vehicle, and the
control lamp of the right-hand side
›››
Fig. 166, indicates the traffic situation to
the rear right of the vehicle.
Keep the warning lamps zone of the lane de-
parture warning free of objects, adhesives or
the likes that may interfere with your visibility.
Lane assist Plus.
The Lane Assist Plus function can be used by
activ
ating the
Lane Assist
›››
page 250 and
Side Assist functions. In this case its func-
tions are expanded as described below.
If the driver initiates a lane change manoeu-
vre in a potential critical situation:
●
The lamp flashes in the corresponding
rear-view mirror even though the turn signal
has not been activated.
●
The steering wheel vibrates to warn the
driver of the risk of collision.
●
torque is applied to correct the steering
and return the vehicle to its lane.
Driving situations
Fig. 167
Schematic representation:
Passing sit-
uation with traffic behind the vehicle.
Indica-
tion of the lane departure warning in the control
lamp on the left side.
Fig. 168
Schematic representation:
Situation
of an overtaking in the centre lane and then mov-
ing into the right-hand lane.
Indication of the
lane departure warning in the control lamp on the
right side.
In the following situations, an indication will
be displa
y
ed in the control lamp
›››
Fig. 167
(arrow) or
›››
Fig. 168 (arrow):
●
When being overtaken by another vehicle
›››
Fig. 167
.
●
When passing another vehicle
›››
Fig. 168
with a speed differential of approx.
10 km/h (6 mph). If the vehicle is passing at a
258
To Next Page
Loading...
Need help?
General
