Cupra FORMENTOR User Manual

Air conditioning
Switching on the stationary air condition-
ing
It can be s
wit
ched on in the following ways:
●
Press the immediate on/off button in the
mobile App or on the MyCUPRA website.
●
Press the immediate on icon  in the Info-
tainment system (while the vehicle is switch-
ed off). During immediate air conditioning,
the vehicle reaches the set temperature in a
maximum of 30 minutes.
●
Automatically programming a departure
time in the mobile App, on the MyCUPRA
website, or in the Battery Manager menu of
the Infotainment system
›››
page 159 .
Switching off the stationary air condition-
ing
In can be switched off in the following ways:
●
Press the immediate on/off button in the
mobile App or on the MyCUPRA website.
●
Press the immediate on/off icon  in the
infotainment system (while the vehicle is
switched off). It is only possible to switch it
off if the stationary air conditioning was
switched on using this button.
●
Press the air conditioning off button in the
air conditioning menu of the infotainment
system (while the vehicle is off).
●
Automatically, a few minutes after the
scheduled departure time.
●
Automatically if the charge level of the ve-
hicle's high-voltage battery drops excessive-
ly.
Note
●
Operating noises are heard while the sta-
tionary air conditioning is connected.
●
When the outside humidity is high and
the inside temperature low, condensation
from the air conditioning system may evap-
orate when the stationary air conditioning
is running. In this case, steam may be re-
leased from underneath the vehicle. This
does not mean that there is a vehicle mal-
function.
Setting the stationary air conditioning
3 Valid f
or: hybrid vehicles.
The stationary air conditioning can be set in
the Infotainment system for the scheduled
departure time. You can set the desired tem-
perature of the inside of the vehicle for the
vehicle’s planned departure time.
Based on the desired temperature, the vehi-
cle calculates the time that the stationary air
conditioning needs to be switched on to
reach the desired temperature at the depar-
ture time.
Vehicle air conditioning prior to departure
●
Open the Battery Manag
er menu.
●
Set the scheduled departure time.
●
Turn on the air conditioning and charging
functions as needed.
If the two air conditioning and charging
functions are on at the same time, the high-
voltage battery is charged first and then the
vehicle is air conditioned. The departure
time can only be enabled when one of the
two functions has been enabled.
If the charging connector is plugged in, the
vehicle starts cooling down around 30 mi-
nutes before the scheduled departure time.
If the vehicle is not ready to drive at the
scheduled departure time, it will be cooled
for a further 15 minutes.
If the charging connector is not plugged in,
the air conditioning operating time is re-
duced to 10 minutes. The operating time is
extended by 5 minutes if the vehicle is not
ready to drive.
The stationary air conditioning switches off
automatically.
Extended stationary air conditioning*
In the Battery Manager menu can be found
an option to add extended air conditioning.
This means if the vehicle is air conditioned
(either by being switched on immediately or
due to departure scheduling), the conven-
ience consumers, e.g. seat or rear window
heating may switch on automatically if
»
159

Cupra FORMENTOR Specifications

General

Brand	Cupra
Model	FORMENTOR
Category	Automobile
Language	English