EasyManuals Logo
Home>Cupra>Automobile>FORMENTOR

Cupra FORMENTOR User Manual

Cupra FORMENTOR
388 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #281 background imageLoading...
Page #281 background image
Help with parking and manoeuvring
Rough or cobbled surf
aces or surfaces
with long grass.
External ultrasound sources, such as
other vehicles equipped with ultra-
sound systems.
Heavy rain or snow, hail or dense ex-
haust gases.
If the number plate is not properly se-
cured to the surface of the bumper.
Gradient changes.
In order to guarantee good operation,
keep the sensors clean, free of snow and
ice, and do not cover them with stickers or
other objects.
If you use high-pressure or vapour equip-
ment for cleaning, do not apply it directly,
unless you do so very briefly, and always
keep a distance of more than 10 cm away.
Fitting certain accessories to the front of
the vehicle, such as a plate holder with ad-
vertising, may interfere with the operation
of the Park Assist.
We recommend that you practice parking
in an area without traffic.
The volume and tone of the signals and
indications can be changed
page 282 .
Please observe information on towing a
trailer
page 283 .
Parking aid Plus*
Description
Fig. 180
Parking aid view on the Infotainment sys-
tem display.
Parking aid plus assists the driv
er b
y giving
visual and audio warnings about obstacles
detected in front of and behind the vehicle.
The bumpers are fitted with sensors. When
an obstacle is detected, it is indicated by au-
dible signals and in the Infotainment system
Fig. 180.
When moving close to an obstacle, it is pos-
sible to know if the obstacle is in front of the
vehicle or behind it by choosing different
sounds.
The approximate measurement range of the
sensors is:
1.20 m
A
0.60 m
1.60 m
0.60 m
As y
ou appr
oach the obstacle, the frequency
of the audible signals will increase. The signal
will sound continuously at around 0.30 m:
Stop the vehicle!
If the separation is maintained, the warning
volume is reduced after about 2.5 seconds.
Parking Aid operation
Manually connecting and disconnecting
the parking aid
Press the function button > Assist
ants >
P
arking Aid.
Automatic connection of Parking Aid
Select reverse gear.
OR: if you drive forward at a speed of less
than 15 km/h (9 mph) and you encounter an
obstacle, it is detected when it is optically
approx. less than 95 cm. away, or acoustical-
ly approx. 50 cm. away. If the automatic con-
nection is activated, a reduced display is
shown.
OR: if the vehicle moves back a certain dis-
tance (between approx. 10 and 20 cm ap-
prox depending on whether or not an obsta-
cle is detected)
»
B
C
D
279

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cupra FORMENTOR and is the answer not in the manual?

Cupra FORMENTOR Specifications

General IconGeneral
BrandCupra
ModelFORMENTOR
CategoryAutomobile
LanguageEnglish

Related product manuals