Cupra FORMENTOR User Manual

Infotainment system
configuration of this product, without a li-
cence fr
om Micr
osoft or an authorised Mi-
crosoft branch is prohibited.
Copyright
As a general rule, audio and video files stored
on data media and audio sources are subject
to intellectual property protection in accord-
ance with the national and international pro-
visions applicable in each case. Please bear
in mind all legal provisions!
Technical data
Central computer with control and display
unit (10")
1)
The f
act
ory-mounted central computer in
the vehicle includes country-specific com-
ponents and software for connectivity and
for the execution of vehicle, comfort and in-
fotainment functions.
The corresponding indications are shown on
the control and display unit screen and partly
on the instrument panel.
■
Capacitive colour screen:
■
Using the equipment with:
■
Touch zones Touch operation.
■
Buttons on the multifunction steering
wheel.
■
Proximity sensors and gesture control.
Vehicle and comfort functions
■
Assistants system settings.
■
Heating and air conditioning settings.
■
Lights and visibility function settings.
■
Vehicle comfort settings.
■
Parking and manoeuvring settings.
Sound system
Basic equipment:
The inf
ot
ainment system that is supplied
from the factory is equipped as follows:
■
Speakers in different locations and with
different power levels (watts).
■
Internal amplifier depending on the sys-
tem:
■
7 speakers: 5 x 20 W
■
Setting options:
■
Equaliser, depending on the system:
■
7 speakers: 5 frequency bands or pre-
defined settings.
■
Sound distribution, depending on the
system:
■
7 speakers: Balance + Fader (left /
right / front / rear).
■
Sound optimisation by zones (valid for
the 7 speaker system):
■
Manual (Driver and All)
■
Automatic depending on the seats oc-
cupied.
Optional sound system
The infotainment system can be extended
with an optional sound system as follows:
■
10 speakers in different locations and with
different power levels (watts).
■
External amplifier (340 W Ethernet), which
processes the audio signals sent by the
central computer.
■
Excitation of speaker channels through
class AB final stages.
■
Audio signal processing in digital internal
signal processor (DSP).
■
Independent subwoofer in the luggage
compartment.
■
Setting options:
■
User equaliser: 5 bands.
■
Equaliser settings predefined by BEATS®
(Signature, Active, Immersive and Voice).
■
Sound distribution: Balance + Fader
(left / right / front / rear).
■
Sound optimisation by zones:
1)
Equipment name: Connect System.
170

Cupra FORMENTOR Specifications

General

Brand	Cupra
Model	FORMENTOR
Category	Automobile
Language	English