Control instruments and warning lamps
Travelling time: This indicat
es the
hour
s (h) and minutes (min) since the
ignition was switched on.
Range: Approximate distance in km
that can still be travelled if the same
driving style is maintained.
AdBlue range or : Approximate
distance in km that can still be travelled
with the current level of the AdBlue®
tank with the same driving style. The in-
dication appears from a range of less
than 2,400 km and cannot be deactiva-
ted.
1)
Distance: Distance covered in km (m)
after switching on the ignition.
Average speed: The average speed
will be shown after driving for approxi-
mately 100 metres.
Digital speed: Current speed dis-
played in digital format.
Eco tips: Recommendations messag-
es are shown to reduce consumption
through good driving practices, e.g. Air
conditioning on: close the win-
dow.
Oil and coolant temperature indication
The engine reaches its operating tempera-
ture when, under normal driving conditions,
–
–
–
–
–
–
–
the oil temperature is between 80°C (176°F)
and 120°C (248°F). If a great effort is required
from the engine and the outside tempera-
ture is high, the engine oil temperature may
increase. This does not present any problem
as long as the warning lamps or
›››
page 323 do not appear on the display.
Warning and information messages
(Vehicle status)
The system runs a check on certain compo-
nents and functions when the ignition is
s
wit
ched on and while the vehicle is moving.
Faults are displayed on the instrument clus-
ter display as red and yellow warning symbols
accompanied with messages and, as appli-
cable, even an audible signal
›››
page 82 .
The representation of the messages and
symbols may vary depending on the version
of the instrument panel.
Existing faults can also be checked manually.
To do so, open the menu Vehicle info
›››
page 88.
Priority 1 warning (red)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Stop
driving! Danger! Check the fault and elimi-
nate the cause. If necessary, seek professio-
nal assistance.
Priority 2 warning (yellow)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Operating
faults or the lack of operating fluids can
cause damage to the vehicle or a fault.
Check the faulty function as soon as possi-
ble. If necessary, seek professional assis-
tance.
Information message
It provides information about processes in
the vehicle.
Accessing warnings and information
●
In the infotainment system, press >
Vehicle info > Vehicle status > Warnings.
1)
Not available in all countries.
71
To Next Page
Loading...
Need help?
General
