EasyManuals Logo
Home>Cupra>Automobile>FORMENTOR

Cupra FORMENTOR User Manual

Cupra FORMENTOR
388 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #319 background imageLoading...
Page #319 background image
Checking and refilling levels
Refilling the dispenser with AdBlue
V
alid f
or vehicles with selective catalytic re-
duction.
Open the tank cap.
Turn the SCR tank cap anti-clockwise
Fig. 199.
Add AdBlue until the nozzle stops for the
first time.
Close the SCR tube by turning it clockwise
until you hear a click.
WARNING
AdBlue® should only be stored in its origi-
nal container, which should be tightly
closed and kept in a safe place.
CAUTION
When refilling, the nozzle grip should be
aligned downward. Otherwise the nozzle
will not connect automatically.
Do not try to add any more additive after
the nozzle has stopped for the first time.
The AdBlue tank could overflow and
AdBlue could spill out.
Only use AdBlue® that complies with the
ISO 22241-1 standard. Only use original
containers.
Never mix AdBlue® with water, fuel or ad-
ditives. Any type of damage caused by such
a mixture will not be covered by the warran-
ty.
Nev
er pour AdBlue® into the fuel tank!
This could result in engine damage.
Do not carry the refill bottle inside the
vehicle. If there is a leak (due to tempera-
ture changes or damage to the bottle), the
AdBlue® may damage the vehicle's interior.
For the sake of the environment
Dispose of the refill bottle in an environ-
ment-friendly manner.
Note
Suitable AdBlue® refill bottles can be pur-
chased from SEAT dealerships.
Engine management and emis-
sions control system
Introduction
WARNING
Due to the high temperatures reached by
the exhaust gas scrubbing system, you
should not park your vehicle near a surface
that can catch fire easily. Fire hazard!
Do not apply wax underneath the vehicle
around the area of the exhaust system: Fire
hazard!
Control lamps
It lights up
Fault in the emission control system.
Reduce speed and drive carefully to the nearest speci-
alised workshop to have the engine checked.
Flashes
Combustion failures that can damage the catalytic
converter.
Reduce speed and drive carefully to the nearest speci-
alised workshop to have the engine checked.
It lights up
Particulate filter blocked
page 318 .

It lights up
Fault in the petrol engine management.
Have the engine checked as soon as possible by a spe-
cialised workshop.
When the ignition is switched on, the

(Electronic
Power Control) lights up and should go off once the
engine has started.
It lights up
Diesel engine preheating system.
The engine can be started straight away when the lamp
switches off.
»
317

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cupra FORMENTOR and is the answer not in the manual?

Cupra FORMENTOR Specifications

General IconGeneral
BrandCupra
ModelFORMENTOR
CategoryAutomobile
LanguageEnglish

Related product manuals