D-Link DSR-Series User Manual 167
Section 8 - Security
Path: Security > Authentication > External Auth Server > NT Domain
The NT Domain server allows users and hosts to authenticate themselves via a pre-congured Workgroup
eld. Typically Windows or Samba servers are used to manage the domain of authentication for the centralized
directory of authorized users.
To congure the router to connect to your NT domain server:
1. Click Security > Authentication > External Auth Server > NT Domain tab.
NT Domain Server
2. Complete the NT server information from the table below and click Save. You can congure up to
three servers.
Field Description
Server Check Click it to test the connection(s) to your AD Server(s).
Authentication Server
(1-3)
Enter the IP address of your NT server(s).
Workgroup (1-3) Enter the NT workgroup name(s).
Timeout Set the amount of time in seconds that the router should wait for a response from the AD server.
Retries This determines the number of tries the controller will make to the AD server before giving up.
Administrator Account
Enter the admin account information that will be used when authentication is required for PPTP/L2TP
connection.
Password Enter the admin password.
Save Click Save at the bottom to save and activate your settings.