D-Link DSR-Series User Manual 169
Section 8 - Security
Radius Accounting Server
Path: Security > Authentication > Radius Accounting > Radius Accounting Server
This page allows user to congure the Radius Accounting Server conguration on the router. If the rst/primary
Radius server is not accessible at any time, the device will attempt to contact the secondary Radius server for
sending accounting requests.
Field Description
Authentication Server Enter the IP address of the primary, secondary and tertiary RADIUS server.
Accounting Port Enter the radius accounting server port for primary, secondary, and tertiary Radius Server.
Secret
Enter the secret key that allows the device to log into the congured RADIUS server. It must match
the secret on RADIUS server.
Save Click Save at the bottom to save and activate your settings.
Cancel Click Cancel to revert to the previous settings.
2. Complete the Radius accounting server information from the table below and click Save. You can
congure up to three servers.
To congure the radius accounting server:
1. Click Security > Authentication > Radius Accounting > Radius Accounting Server.