D-Link DSR-Series User Manual 168
Section 8 - Security
Radius Accounting
Path: Security > Authentication > Radius Accounting
The Radius accounting page allows user to enable or disable the Radius Accounting feature and also to congure
Accounting Interim Interval (in seconds) at which the device sends the trac statistics of a session in accounting
messages to the congured Radius Server.
To congure the router to connect to your RADIUS server:
1. Click Security > Authentication > Radius Accounting tab.
Radius Accounting
Field Description
Captive Portal Select the check box to enable the radius accounting for captive portal feature.
Radius Accounting Interim
Interval
The interim interval at which Radius Accounting (Interim-Update) packets should be sent by the
device. The value should be in the range 300 - 3600. By default, it is 300.
Save Click Save to save and activate your settings.
Cancel Click Cancel to revert to the previous settings.
2. Complete the Radius Accounting information from the table below and click Save.