Serial port Advanced RealPort configuration without using the Digi Navigator
Digi Connect EZ Mini User Guide
161
4. In the Device Filters section, a list of the Digi device types display. All types are disabled by
default, and when all are disabled, all types are displayed.
5. To filter the types that are displayed, click the enable slider for the types you want to display.
Only the enabled types will display, and all other types remain disabled and do not display.
6. Click Filters at the bottom of the expanded toolbar to minimize the toolbar and hide the filters.
Access Digi Remote Manager from the Digi Navigator
You can access Digi Remote Manager from the Digi Navigator. Within the Remote Manager, you can
configure and monitor your Digi devices.
For information about using Digi Remote Manager, refer to the Digi Remote Manager User Guide.
1. Make sure Digi Navigator is installed.
2. Launch the Digi Navigator.
3. Click the Digi Remote Manager link in the toolbar.
4. The Digi Remote Manager login screen launches.
a. Enter your Remote Manager user name and password.
b. Click Login.
Advanced RealPort configuration without using the Digi
Navigator
You can configure the Connect EZ to communicate with your computer using RealPort.
To Next Page
Loading...
Need help?
General