Digi Connect EZ Mini User Manual

Virtual Private Networks (VPN) OpenVPN
Digi Connect EZ Mini User Guide
254
Configure an OpenVPN client without using an .ovpn file
Required configuration items
n Enable the OpenVPN client.
The OpenVPN client is enabled by default.
n The mode used by the OpenVPN server, either routing (TUN), or bridging (TAP).
n The firewall zone to be used by the OpenVPN client.
n The IP address of the OpenVPN server.
n Certificates and keys:
l The CA certificate (usually in a ca.crt file).
l The Public key (for example, client.crt)
l The Private key (for example, client.key).
Additional configuration items
n The route metric for the OpenVPN client.
n The login credentials for the OpenVPN client, if configured on the OpenVPN server.
n Additional OpenVPN parameters.
See Configure SureLink active recovery for OpenVPN for information about OpenVPN active recovery.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > OpenVPN > Clients.

Digi Connect EZ Mini Specifications

General

Brand	Digi
Model	Connect EZ Mini
Category	Server
Language	English