Digi Connect EZ regulatory and safety statements CE and UKCA OEM labeling requirements
Digi Connect EZ Mini User Guide
723
The CE mark shall consist of the initials “CE” taking the following form:
n If the CE marking is reduced or enlarged, the proportions given in the above graduated
drawing must be respected.
n The CE marking must have a height of at least 5 mm except where this is not possible on
account of the nature of the apparatus.
n The CE marking must be affixed visibly, legibly, and indelibly.
UK Conformity Assessed (UKCA) labeling requirements
See guidance/using-the-ukca-marking for further details.
You must make sure that:
n If you reduce or enlarge the size of your marking, the letters forming the UKCA marking must
be in proportion to the version set out below.
n The UKCA marking is at least 5 mm in height – unless a different minimum dimension is
specified in the relevant legislation.
n The UKCA marking is easily visible, legible (from 1 January 2023 it must be permanently
attached).
n The UKCA marking can take different forms (for example, the color does not have to be solid),
as long as it remains visible, legible and maintains the required proportions.
To Next Page
Loading...
Need help?
General