Virtual Private Networks (VPN) IPsec
Digi Connect EZ Mini User Guide
200
Parameters Current Value
-----------------------------------------------------------------------
-------
debug none Debug level
ike_fragment_size 1280 Maximum IKE fragment size
ike_retransmit_tries 5 IKE retransmit tries
keep_alive 40s NAT keep alive time
Additional Configuration
-----------------------------------------------------------------------
--------
connection_retry_timeout Connection retry timeout
connection_try_interval Connection try interval
ike_timeout IKE timeout
(config)>
Generally, the default settings for these should be sufficient.
c. You can also enable debugging for IPsec:
(config)> vpn ipsec advanced debug value
(config)>
where value is one of:
n none
n basic_auditing
n detailed_control
n generic_control
n raw_data
n sensitive_data
20. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
21. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
To Next Page
Loading...
Need help?
General