EasyManuals Logo
Home>Digi>Server>Connect EZ Mini

Digi Connect EZ Mini User Manual

Digi Connect EZ Mini
774 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #228 background imageLoading...
Page #228 background image
Virtual Private Networks (VPN) IPsec
Digi Connect EZ Mini User Guide
228
a. To enable the creation of a new private key for renewal requests:
(config network scep_client scep_client_name)> renewal new_key true
(config network scep_client scep_client_name)>
b. The use of a client certificate for renewal requests is enabled by default. To disable:
(config network scep_client scep_client_name)> renewal use_client_cert
false
(config network scep_client scep_client_name)>
12. Set the maximum time that the device will poll the SCEP server, when operating in manual
mode:
(config network scep_client scep_client_name)> max_poll_time value
(config network scep_client scep_client_name)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the format
number{w|d|h|m|s}.
For example, to set max_poll_time to ten minutes, enter either 10m or 600s:
(config network scep_client scep_client_name)> max_poll_time 600s
(config network scep_client scep_client_name)>
The default is 1d.
13. Set the amount of time that the device should wait between polling attempts, when operating
in manual mode:
(config network scep_client scep_client_name)> polling_interval value
(config network scep_client scep_client_name)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the format
number{w|d|h|m|s}.
For example, to set polling_interval to ten minutes, enter either 10m or 600s:
(config network scep_client scep_client_name)> polling_interval 600s
(config network scep_client scep_client_name)>
The default is 5s.
14. Set the bit size of the private key:
(config network scep_client scep_client_name)> key_length int
(config network scep_client scep_client_name)>
The default is 2048.
15. Set the number of days that the certificate enrollment can be renewed, prior to the request
expiring. This value is configured on the SCEP server, and is used by the Connect EZ device to
determine when to start attempting to auto-renew an existing certificate. The default is 7.
(config network scep_client scep_client_name)> renewable_time integer
(config network scep_client scep_client_name)>

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digi Connect EZ Mini and is the answer not in the manual?

Digi Connect EZ Mini Specifications

General IconGeneral
BrandDigi
ModelConnect EZ Mini
CategoryServer
LanguageEnglish

Related product manuals