Digi Connect EZ Mini User Manual

Firewall Packet filtering
Digi Connect EZ Mini User Guide
580
4. Set the action to be performed by the filter rule.
(config firewall filter 1)> action value
(config firewall filter 1)>
where value is one of:
n accept: Allows matching network connections.
n reject: Blocks matching network connections, and sends an ICMP error if appropriate.
n drop: Blocks matching network connections, and does not send a reply.
5. Set the firewall zone that will be monitored by this rule for incoming connections from network
interfaces that are a member of this zone:
See Firewall configuration for more information about firewall zones.
(config firewall filter 1)> src_zone my_zone
(config firewall filter 1)>
6. Set the destination firewall zone. Packets destined for network interfaces that are members
of this zone will either be accepted, rejected or dropped by this rule.
See Firewall configuration for more information about firewall zones.
(config firewall filter 1)> dst_zone my_zone
(config firewall filter 1)>
7. Set the IP version.
(config firewall filter 1)> ip_version value
(config firewall filter 1)>
where value is one of:
n any
n ipv4
n ipv6
n The default is any.
8. Set the protocol.
(config firewall filter 1)> protocol value
(config firewall filter 1)>
where value is one of:
n any
n icmp
n icmpv6
n tcp
n upd
The default is any.

Digi Connect EZ Mini Specifications

General

Brand	Digi
Model	Connect EZ Mini
Category	Server
Language	English