Digi Connect EZ Mini User Manual

Firewall Web filtering
Digi Connect EZ Mini User Guide
602
The Configuration window is displayed.
3. Disable web filtering:
a. Click Firewall > Web filtering service.
b. Click Enable web filtering to disable.
c. Click Apply to save the configuration and apply the change.
4. From a new tab in your browser, attempt to connect to the Cisco test
URLhttp://www.internetbadguys.com.
The connection should be successful.
5. Return to the Connect EZ WebUI and enable web filtering:
a. Click Firewall > Web filtering service.
b. Click Enable web filtering to enable.
c. Click Apply to save the configuration and apply the change.
6. From your browser, attempt to connect tohttp://www.internetbadguys.com again.
The connection attempt should fail with the message, "This site is blocked due to a phishing
threat."
Command line
This procedure assumes you have already configured web filtering to use either Cisco Umbrella or the
Cisco open DNS servers.
n See Configure web filtering with Cisco Umbrella for information about configuring web filtering
with Cisco Umbrella.
n See Configure web filtering with manual DNS servers for information about configuring web
filtering to use Cisco open DNS servers.
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect EZ local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Disable web filtering:
> config firewall web-filter enable false
>
3. Attempt to connect to the Cisco test URLhttp://www.internetbadguys.com by using either a
web browser or the curl command from a Linux shell:
$ curl -I http://www.internetbadguys.com
HTTP/1.1 200 OK
Server: Apache
Content-Type: text/html; charset=UTF-8
Accept-Ranges: bytes
Date: Tues, July 18, 2023 10:25:00

Digi Connect EZ Mini Specifications

General

Brand	Digi
Model	Connect EZ Mini
Category	Server
Language	English