Interfaces Configure a TCP connection timeout
Digi Connect EZ Mini User Guide
98
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Set the TCP retry attempts value:
a. Click Network > Advanced.
b. For TCP retries2, enter the number of times an unacknowledged TCPdata packet will be
transmitted before the connection is considered lost.
Minimum: 0
Maximum: 255
Default: 15
4. Click Apply to save the configuration and apply the change.
To Next Page
Need help?
General