Revision Date Description
type for the 5G modems.
n
Surelink enhancements:
l
Enabled Surelink reset_modem action by default on
cellular interfaces and set fail count to three.
l
Updated Surelink reset_modem action to
automatically power cycle the modem in the event
that the modem fails to reset.
n
Serial port support enhancements:
l
Added serial PPP dial-in mode to handle AT-based
connection requests from a device connected to a
serial port and provide IPv4 networking to the
device.
l
Added suppport for Realport serial mode.
n
Added the ability to configure CPU performance and
power consumption.
n
Added cellular APN and cellular connection duration as
datapoints sent to Digi Remote Manager.
n
Wi-Fi scanner enhancements:
l
Added support for sending an HTTP or TCP stream
of results from the Wi-Fi scanner to one or more
remote servers.
n
SCEP enhancements:
l
New SCEP client settings and underlying
functionality to support connecting to additional
SCEP servers.
l
Added show scep Admin CLI command to show
the sync status, expiration dates, and additional
details of any configured SCEP clients.
n
VPN enhancements:
l
Include the hostname of the device in the client
.ovpn file listed on the Status → OpenVPN → Servers
page in the web UI.
n
Location services enhancements:
l
New settings to control the NMEA message content
that the devices sends when there is no valid fix
from any of the configured location sources.
I Not used.
J September 2022
Release of Digi IX10 firmware version 22.8:
n
Cellular modem enhancements:
l
Added modem ota download and system
firmware ota download commands for
IX10 User Guide
3
To Next Page
Loading...
Need help?
General
