Digi IX10 User Manual

System administration Update cellular module firmware
IX10 User Guide
816
1. Log into the IX10 WebUI as a user with Admin access.
2. On the main menu, click System. Under Administration, click Firmware Update.
3. Click Duplicate firmware.
4. Click Duplicate Firmware.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Duplicate the firmware:
> system duplicate-firmware
>
Update cellular module firmware
You can update modem firmware by downloading firmware from the Digi firmware repository, or by
uploading firmware from your local storage onto the device. You can also schedule modem firmware
updates. See Schedule system maintenance tasks for details.
Note Before attempting to update cellular module firmware, you should either ensure that there is a
SIMcard in the module, or disable SIM failover. See Configure a Wireless Wide Area Network (WWAN)
for details about SIM failover.
Web
1. (Optional) Download the appropriate modem firmware from the Digi repository to your local
machine.
2. Log into the IX10 WebUI as a user with Admin access.

Digi IX10 Specifications

General

Brand	Digi
Model	IX10
Category	Network Router
Language	English