Digi IX10 User Manual

Virtual Private Networks (VPN) L2TP
IX10 User Guide
448
L2TP
Your IX10 device supports PPP-over-L2TP (Layer 2 Tunneling Protocol).
Configure a PPP-over-L2TP tunnel
Your IX10 device supports PPP-over-L2TP (Layer 2 Tunneling Protocol). The tunnel endpoints are
known as L2TP Access Concentrators (LAC) and L2TP Network Servers (LNS). Each endpoint
terminates the PPP session.
Required configuration items
n
For L2TP access concentrators:
l
The hostname or IP address of the L2TP network server.
l
The firewall zone for the tunnel.
n
For L2TP network servers:
l
The IP address of the L2TP access concentrator.
l
The local IP address assigned to the L2TP virtual network interface.
l
The IP address assigned to the remote peer.
l
The firewall zone for the tunnel.
Additional configuration items
n
The UDP port that L2TP servers will listen on, if other than the deafult of 1701.
n
Access control for the L2TPtunnel.
n
For L2TP access concentrators:
l
L2TP network server port.
l
The username and password of the L2TP server.
l
The metric for the tunnel.
l
Enable custom PPP configuration options for the tunnel.
o
Whether to override the default configuration and only use the custom options.
o
Optional configuration data in the format of a pppd options file.
n
For L2TP network servers:
l
The Authentication method.
l
The metric for the tunnel.
l
Enable custom PPP configuration options for the tunnel.
o
Whether to override the default configuration and only use the custom options.
o
Optional configuration data in the format of a pppd options file.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:

Digi IX10 Specifications

General

Brand	Digi
Model	IX10
Category	Network Router
Language	English