Diagnostics Analyze network traffic
IX10 User Guide
900
Analyze network traffic
The IX10 device includes a network analyzer tool that captures data traffic on any interface and
decodes the captured data traffic for diagnostics. You can capture data traffic on multiple interfaces
at the same time and define capture filters to reduce the captured data. You can capture up to 10 MB
of data traffic in two 5 MB files per interface.
To perform a more detailed analysis, you can download the captured data traffic from the device and
view it using a third-party application.
Note Data traffic is captured to RAM and the captured data is lost when the device reboots unless you
save the data to a file. See Save captured data traffic to a file.
This section contains the following topics:
Configure packet capture for the network analyzer 901
Example filters for capturing data traffic 910
Capture packets from the command line 911
Stop capturing packets 912
Show captured traffic data 913
Save captured data traffic to a file 915
Download captured data to your PC 915
Clear captured data 917
To Next Page
Loading...
Need help?
General
