Digi IX10 User Manual

System administration Configuration files
IX10 User Guide
833
Configuration files
The IX10 configuration file, /etc/config/accns.json, contains all configuration changes that have been
made to the device. It does not contain the complete device configuration; it only contains changes to
the default configuration. Both the default configuration and the changes contained in the accns.json
file are applied when the device reboots.
Save configuration changes
When you make changes to the IX10 configuration, the changes are not automatically saved. You must
explicitly save configuration changes, which also applies the changes. If you do not save configuration
changes, the system discards the changes.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.

Digi IX10 Specifications

General

Brand	Digi
Model	IX10
Category	Network Router
Language	English