Common Service Settings
129
Tools
5
îš„ Allow User to Lock Out
Selecting [Lock Out Printer] on the Services Home screen temporarily disables printing.
[Release Printer] is displayed during the printer lockout duration. Selecting [Release Printer]
enables printing.
z
The printer lockout status is not released automatically even after the end time elapsed. To release the
printer lockout status, the control panel operation is required.
z
The machine starts printing in accordance with the setting in [Auto Print] when [Release Printer] is selected.
Thus the printing may not start just after [Release Printer] is selected.
z
When the [Allow User to Lock Out] check box is deselected, [Disable Auto Printing] in [Services Home -
Additional Features] is displayed as [(Not Assigned)].
Time Zone
Set the time difference from GMT between -12 and +12 hours.
z
GMT stands for Greenwich Mean Time.
Daylight Savings
You can set daylight saving time. During daylight saving time period, the machine moves
the clock forward by one hour.
Select from [Adjust Off], [Adjust by Day, Month & Time], and [Adjust by Month, Week, Day
of Week & Time].
If you select [Adjust by Day, Month & Time], specify the month, day, and time for [Start
Date] and [End Date].
If you select [Adjust by Month, Week, Day of Week & Time], specify the month, week, day
of week, and time for [Start Date] and [End Date].
Warmer Mode
Set whether to enable the Warmer mode, which is used to prevent or reduce condensation
inside the machine.
Select [Disabled] or [Enabled].
If you select [Disabled], the machine will not enter the Warmer mode. To display a message
when condensation may have occurred, select [Condensation Alert].
If you select [Enabled], you can specify [Start Time] and [Duration] for the Warmer mode.
To automatically switch the Warmer mode to [Disabled] after a specified period of absence
of condensation has elapsed, select [Auto Disabled].
z
This feature is for service representative use. For more information, contact our Customer Support Center.
z
During operation of the Warmer mode, the machine does not enter the Sleep mode.
To Next Page
Loading...
Need help?
General
