Maintenance
86
Maintenance
3
2
Wipe the constant velocity transport glass with a soft cloth moistened with water to
remove any dirt, and then wipe it with a soft dry cloth.
z
Do not use cleaning agents other than water or neutral detergent.
z
If you cannot remove dirt easily, gently wipe the glass with a soft cloth moistened with a small amount of
neutral detergent.
Cleaning the Document Feeder Rollers
If the document feeder rollers become soiled, smudges may appear on copies, faxes, or
scanned documents and paper jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a month.
z
Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or coating on
plastic parts.
z
Cleaning the machine with an excessive amount of water may cause the machine to malfunction or damage
documents during copying, faxing, scanning, or printing.
1
Pull up the knob on the document feeder top cover, and open the document feeder top
cover completely.
z
When you fully open the cover, it enters a fixed position. Open the cover gently.
To Next Page
Loading...
Need help?
General
