Authentication and Accounting Features
434
Authentication and Accounting Features
14
Configuration for Account Administration
This section describes the settings to use the accounting feature on the machine.
"Step 1 Selecting an Accounting Type" (P.434)
"Step 2 Registering User Information" (P.434)
Step 1 Selecting an Accounting Type
The following describes the configuration procedures to use the accounting feature.
z
For information on relationships between the authentication and accounting modes, refer to "Authentication and Accounting
Relationship" (P.415).
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
z
The default user ID is "11111".
z
The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
4
Select [Accounting].
5
Select [Accounting Type].
6
Select an accounting type, and then select [Save].
z
You can select the accounting type from [Local Accounting], [Network Accounting], and [Xerox Standard
Accounting].
7
Select [Close] repeatedly until the [Tools] screen is displayed.
8
Select [Close].
Step 2 Registering User Information
1
Press the <Log In/Out> button.
To Next Page
Loading...
Need help?
General
