Installation When Using USB Port
321
Printer Environment Settings
7
3
Configure [Print Mode] or [Auto Eject Time] as necessary.
z
For information on the setting items, refer to "USB" (P.172).
4
Select [Close] repeatedly until the [Tools] screen is displayed.
5
Select [Close].
z
Rebooting the machine may be required depending on the settings. When a message displayed on the
screen, follow the message and reboot the machine.
6
Print a configuration report to confirm that the USB port is enabled.
z
For information on how to print a configuration report, refer to Printer Reports(P.97).
Step 3 Configuration on the Computer
To print from the machine, you need to install a print driver on your computer.
z
For information on the supported operating systems, refer to "Supported Operating Systems" (P.319).
z
For Mac OS X 10.5/10.6, Mac OS X 10.7 Lion, and OS X 10.8 Mountain Lion, OS X 10.9 Mavericks and OS X
10.10 Yosemite, you can use USB without the Adobe PostScript 3 Kit (optional) if you install the print driver
for Mac OS X contained in the media provided with the driver.
z
For information on the installation procedures of Adobe PostScript 3 Kit (optional), refer to the manual
contained in the CD-ROM provided with the Adobe PostScript 3 Kit (optional).
CentreWare Internet Services Setting Items
You can configure the following setting items using CentreWare Internet Services:
z
For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet Services screen to see help.
z
To display the online help for CentreWare Internet Services, users need to have the environment to connect
to the internet. The communication fee shall be borne by you.
z
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.312).
z
Receiving buffer size for the USB interface
([Properties] > [General Setup] > [Memory Settings] > [USB])
z
Port Settings
z
Bi-directional Communication
z
Auto Eject Time
z
Adobe Communication Protocol
z
The Adobe Communication Protocol can be configured when the Adobe PostScript 3 Kit (optional) is
installed.
To Next Page
Loading...
Need help?
General
