z
From the control panel on the machine, you can cancel print jobs or force the machine to print the jobs
remaining in the receiving buffer. For more information on the operation, refer to "11 Job Status" in the User
Guide.
Notes and Restriction for Using Secondary Ethernet (Optional)
This section describes notes and restrictions to observe when using Secondary Ethernet
(optional).
z
The exceptions setting dialog box may be displayed when you access CentreWare
Internet Services using FQDN by Ethernet 2 while enabling [HTTP - SSL/TLS
Communication].
z
The job log does not record Ethernet1 and Ethernet2 separately. You cannot identify
which network has transmitted a job.
z
The remaining level of consumables and the meter value information transmitted from
the machine are identical between Ethernet 1 and Ethernet 2. When you use the
software which is not supplied by Fuji Xerox to check the machine usage status, please
do not set IP address to avoid the duplication of machine information. Instead of IP
address, set the machine-specific information such as UUID depending on the software
you use.
z
When [LPD Print Queue] is set to [Job Submission Order], no priority of print order occurs
between Ethernet 1 and Ethernet 2.
z
The submission, status confirmation (lpq), and cancellation (lprm) of print jobs from
different hosts which have the same IP address are processed as the same host’s
request.
z
Port 9100 receives a print job from single line at one time even when two Ethernet
interface lines are used.
z
[Get IP Address from DHCP] of [IPv6 - DNS Server Setup] is available only for [TCP/ IP -
Network Settings (Ethernet 1)]. For [TCP/IP - Network Settings (Ethernet 2)], set the DNS
server address manually.
z
On the [Properties] tab > [Connectivity] > [Protocols] > [TCP/IP] of CentreWare Internet
Services, selecting [Enabled] for [Dynamic DNS Registration] of both Ethernet 1 and
Ethernet 2 may cause the Dynamic DNS registration to fail. Select [Enabled] only for
either Ethernet 1 or Ethernet 2 to use the Dynamic DNS registration feature.
Notes and Restrictions for Using Bonjour
This section describes notes and restrictions to observe when using Bonjour.
îš„ Supported Environment for Bonjour
Bonjour is available on Printer Setup Tool (Print Center, Printer Setup Utility) of Mac OS X
10.5/10.6, Mac OS X 10.7 Lion, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, OS X 10.10
Yosemite, or Macintosh computers that use Safari. The Discovery feature of Bonjour is
available only within the same subnet.
îš„ Printer Name
z
If you change a printer name or a host name that is already assigned, documents may
be printed by a printer that is not selected.