z
You cannot import a certificate that has been already registered in [Local Device] or [Others]. Delete the
registered certificate before importing.
z
If the certificate to be imported contains the V3 extension "keyUsage", "digitalSignature" must be asserted.
For information on how to check it on Windows, refer to "How to check the certificate settings on Windows"
(P.391).
1) Click the [Properties] tab.
2) Click [Security] to display the items in the folder.
3) Click [Machine Digital Certificate Management].
4) Click [Upload Signed Certificate].
5) Enter the password of the certificate for [Password].
6) Enter [Password].
7) Enter [Retype Password].
8) Enter a file name you want to import or select a file to import from a dialog box
displayed by clicking the [Browse] button, and then select [Save].
9) Click the [Import] button.
10)Refresh the web browser.
3
Configure the certificate.
1) Click [Security].
2) Click [Certificate Management].
3) Select [Local Device] for [Category] and [IPsec] for [Certificate Purpose], and then click
the [Display the list] button.
4) Select the check box next to the certificate to set.
5) Click the [Certificate Details] button.
6) Click the [Use this certificate] button.
7) Click [Reboot Machine]. The machine reboots and the settings are enabled.
Step2 Configuration on the Machine (Configuration of IPsec)
The following describes configuration procedures to set up IPsec on the machine.
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
To Next Page
Loading...
Need help?
General
