Notes and Restrictions
691
Appendix
16
z
The machine does not exit the Sleep mode when you use the EP service by EP-BB.
z
When [Tools] > [System Settings] > [Connectivity & Network Setup] > [Port Settings] >
[USB] > [USB - Print Mode] is set to any option other than [Auto], exiting the Power Saver
mode activates the entire machine.
Notes and Restrictions on the Use of the Copy Feature
îš„ Copy Feature
The machine does not offer the Improves Fit feature.
îš„ Copy and Simple Copy
You cannot switch the screen between the Copy and Simple Copy services. Return to the
Services Home screen, and then select a service. In that case, the settingsspecified in either
service are cleared.
îš„ ID Card Copy
z
The machine does not shift the ID card image to the center of the output in any
magnification ratio and image size you specified.
z
When the reduced size is specified to copy an ID card, the machine may copy the ID card
in a different orientation from the original orientation depending on the magnification
ratio specified.
Notes and Restrictions on the Use of the Print Feature
îš„ Output of Long Feed Documents
The output of long feed documents is not supported.
îš„ PostScript Driver
Some options such as Poster (Photo Enlargement) are not supported by the PostScript
driver. With the Pages per Sheet (N-Up) feature, you can specify 2, 4, 6, 9, or 16 pages up,
and with or without frame borders.
îš„ Printing from Macintosh via USB Connection
When you send a print job from the PostScript driver of Macintosh connected via USB and
the job includes application data with graphic data (EPS file including binary data) pasted,
the machine may misidentify the binary data as protocol data; therefore, the output of text
data may extend for multiple pages.
In this case, select [RAW] for [Adobe Communication Protocol] under [Tools] > [System
Settings] > [Connectivity & Network Setup] > [Port Settings] > [USB] to properly print data
which includes EPS files with binary data.
îš„ Text for Media Print
You can use a commercially available single-slot memory card reader, but the operation is
not guaranteed. When you use a multi-slot memory card reader, only one of those slots can
be recognized. The slot to be used differs depending on the card readers. Some of the
media and slots of memory card readers may not be used on the machine, and the
operation is not guaranteed.
îš„ Thumbnail for Media Print
The Media Print - Text feature supports neither Thumbnail view nor Preview.
To Next Page
Loading...
Need help?
General
