Appendix
716
Appendix
16
z
When you change Login Type to or from [Login to Remote Accounts], user information,
private folders, and Job Flow sheets registered on the machine will be deleted.
z
ApeosWare Authentication Management and ApeosWare Authentication Agent do not
support the feature to automatically obtain the certificate of the authenticated users
from a remote server.
z
ApeosWare Authentication Management does not support the feature to automatically
obtain the certificate of the authenticated users from a remote server.
îš„ Notes and Restriction on Authentication and Accounting
z
The general shared folders created under the [No Login Required] mode become
unavailable after the machine's login type is changed to require login.
z
When the machine's login type is set to require login, the private folders and the
administrator shared folder can be created. The general shared folder cannot be created.
îš„ Notes on the User ID setting
If you change the [User ID for Login] setting under [Authentication / Security Settings] >
[Authentication] > [User Details Setup], the registered user information including the user-
related folders and job flow sheets will be deleted.
îš„ Notes on Job Status Default Setting
If you set [Hide Job Details] on [Authentication / Security Settings] > [Job Status Default],
you cannot stop or delete jobs you instructed. Therefore, you cannot cancel jobs in the case
of operational error of copies or wrong transmission of faxes.
îš„ Remote Authentication and ApeosWare Authentication Management and ApeosWare
Authentication Agent (ApeosPort Series Models Only)
z
The limit for the maximum number of pages is not available.
îš„ Remote Authentication using the Smart Card
z
Remote Authentication can be performed in an environment where Active Directory of
ApeosWare Authentication Management (sold separately) or, ApeosWare
Authentication Agent (sold separately), or the combination of Active Directory and
ApeosWare Authentication Management or ApeosWare Authentication Agent is used.
z
Change the default realm name only when you want to use a different realm name.
Notes and Restrictions for Using SMB
This section describes notes and restrictions to observe when using SMB.
îš„ Configuration on the Machine
z
IP addresses are managed for the entire system. Configure the settings only after
consulting your network administrator.
z
The setting of subnet mask and gateway addresses may be required depending on the
network environment. Consult your network administrator and configure the required
settings.
îš„ Configuration on the Computer
z
IP addresses are managed for the entire system. Configure the settings only after
consulting your network administrator.
z
When setting the network such as IP addresses with a host used under the Network
Information Service (NIS), consult your NIS administrator.
To Next Page
Loading...
Need help?
General
