Copy Service Settings
163
Tools
5
Reduce/Enlarge
Set the default value for [Reduce/Enlarge] in the [Copy] screen.Select the ratio from
[100%], [Auto %], and the buttons registered as Reduce/Enlarge Preset buttons.
z
For information on the Reduce/Enlarge Preset buttons, refer to "Reduce/Enlarge Presets" (P.169)".
Original Type
Set the default value for [Original Type] on the [Image Quality] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] of [Image Options] in the [Image Quality]
screen.
Sharpness
Set the default value for [Sharpness] of [Image Options] in the [Image Quality] screen.
Background Suppression
This feature allows you to suppress the background color of documents.
Set the default value for [Suppress Background] of [Background Suppression] in the [Image
Quality] screen.
[Background Suppression] is valid when [Original Type] is set to [Photo & Text], [Text],
[Light Text], or [Text on See-Through Paper].
2 Sided Copying
Set the default value for [2 Sided Copying] in the [Copy], [Layout Adjustment], and [Output
Format] screens.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Layout Adjustment] screen.
Edge Erase - Top Edge
When you copy a document with the document cover open or when you copy a book, the
edges and center margin of the document may be printed as black shadows. This feature
allows you to erase such shadows on the top edge.
Set the default value for the amount of edge erased from the original in the top directions
in [Edge Erase] in the [Layout Adjustment] screen. Set the value from 0 to 50 mm in 1 mm
increments.
z
You cannot copy the whole area even if you set [0] to [Edge Erase - Top Edge]. For the printable area, refer to
"Printable Area" (P.631).
To Next Page
Loading...
Need help?
General
