Tools
226
Tools
5
îš„ Enter Once Only
No need to re-enter the recipient.
îš„ Enter Twice
Use the Speed Dial feature to re-enter the recipient.
îš„ Re-enter Fax Number or E-mail
You cannot enter the speed dial when you re-enter the number or address. Use the fax
number, SIP User ID (Sign-in Name), phone number or SIP user name for IP fax, or e-mail
address to enter the recipient.
Re-enter Group Recipients
Specifies whether you need to re-enter group addresses after entering a group address.
îš„ Group Send Disabled
No group recipient is allowed.
îš„ Enter Once Only
No need to re-enter the group recipient.
îš„ Enter Twice
Re-entering the group recipient is required.
Broadcast Checkbox on 1st Tab
Specify whether or not to show the [Enable Broadcast] checkbox in the [Fax/Internet Fax]
screen to explicitly express broadcast directions.
Chain Dial
Allows you to combine the fax numbers registered in one touch button, speed dial, and
address book respectively and the numbers entered using the numeric keypad to specify as
one recipient. You can select from [No] or [Yes].
z
This item is valid when [Address Book Type] under [Tools] > [System Settings] > [Address Book Settings] is set
to [Type 1].
Manual Redial List - Saved Entries
Specify the number of redial destinations saved.
Manual Redial List - Dial Mode
Specify the destination type saved as a redial destination number.
When you deselect all the check boxes, the Redial feature becomes disabled.
Transmission Header Text - Polling
Set whether or not to attach a transmission header to a polling file.
A polling is the function that a document is stored in the machine's public folder for polling,
and can then be sent by an operation from the other party.
To Next Page
Loading...
Need help?
General
