Fuji Xerox DocuCentre-V 3060 User Manual

Network-related Problems
477
Problem Solving
15
The IP address is incorrect. Confirm the IP address. If the IP address is incorrect,
either set a static IP address or resolve the IP address
using DHCP or AutoIP.
The IP gateway address is
incorrect.
Set the correct IP gateway address when connecting to
the proxy server, or to a Web server via the IP gateway.
The subnet mask is incorrect. Set the correct subnet mask corresponding to your
environment.
The DNS server address is
incorrect.
Confirm the DNS server address.
The DNS server selected cannot
resolve the address.
Select a DNS server that can resolve the address.
z
When connecting via the proxy server Set the IP
address of a DNS server that can resolve the address
of the proxy server.
z
When not connecting via the proxy server Set the IP
address of a DNS server that can resolve the
destination address.
The address of the address that
does not use a proxy server is
incorrect.
Confirm whether only addresses that do not use a proxy
server are set. Even if addresses not through a proxy
server are specified using the FQDN, if a server is
directly accessed using its IP address, the registered
server is not excluded. Set the address not to use a
proxy server. Likewise, even if you directly specify an
address that does not use a proxy server, if a server is
accessed with the FQDN, the registered server is not
excluded. Set an IP address with the FQDN not to use a
proxy server.
The desired server, or theproxy
server is down.
Confirm whether the desired server or the proxy server
is operating correctly.
The network cable is not
connected, or broken.
Confirm whether the network cable is correctly
connected. We recommend using a spanning-tree
configuration, with which network disconnection rarely
occurs.
Cannot communicate because
of overloading of the server
application.
Wait for a while and try accessing again.
An error occurs that is not
displayed on the control panel.
Even though an error occurs during background
processing, no message appears on the control panel.
Display the [Job Status] screen or print the Job History
Report to confirm the result.
Cannot access the proxy server,
firewall, or Web server as a
result of access control.
The following types of access control are used. Confirm
the configured access control.
z
Address (port) restriction
z
SSL restriction
z
User access restriction (including access right levels)
z
Content block
z
Scheme restriction (cannot use HTTP etc.)
z
Transfer data size restriction
z
Method restriction (cannot use POST etc.)
z
HTTP header restriction (only accepting specified
browsers etc.)
z
Time restriction (only available during a specific
period of time etc.)
Cause Remedy

Fuji Xerox DocuCentre-V 3060 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V 3060
Category	All in One Printer
Language	English