Fujitsu PRIMERGY RX2530 M6 User Manual

Note on Advanced Thermal Design (ATD)
If the Advanced Thermal Design (ATD) option is available and has been
enabled for your server, please set information within the Chassis ID
Prom Tool accordingly
.
The ATD option can only be ordered from the manufacturer as a factory
preset. To find out if your server is ATD-enabled, check for the ATD logo
on the identification rating plate.
For ATD logo and more information on Advanced Thermal Design
(ATD), see the operating manual of your server.
CAUTION
You can only set the ATD flag. Resetting the ATD flag using the Chassis
ID Prom Tool is not possible!
5.3.15 Configuring LAN teaming
Using ServerView Operations Manager
▶
Use the ServerView Operations Manager to obtain more information on
existing LAN teams:
▶
In ServerV
iew Operations Manager Single System View select System
Status from the Information/Operation menu.
▶
Under Network Interfaces select LAN Teaming.
▶
The Network Interfaces (Summary) overview shows all configured LAN
teams and their components. Choose a LAN team to display further
details:
LAN Team Properties: Properties of the selected LAN team
LAN Team Statistics: Available statistics about the selected LAN team
For more information, see the "ServerView Operations Manager - Server
Management" user guide.
Basic software procedures
100 Upgrade and Maintenance Manual RX2530 M6

Fujitsu PRIMERGY RX2530 M6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX2530 M6
Category	Server
Language	English