â–¶
If applicable, "Installing the front cover with lock" on page 66.
7.5.6
Removing 2.5-inch PCIe SSD modules
Customer Replaceable
Unit (CRU)
Hardware: 5 minutes
Tools: tool-less
This procedure is valid, if the PCIe SSD module is controlled by an
onboard controller and the VMD function is enabled in the BIOS. For
more information, see the "Intel Virtual RAID on CPU (Intel VROC) User
Guide".
If the PCIe SSD module is controlled by a RAID controller of the PRAID
EP5xxi/CP5xxi/EP6xxi family
, the PCIe SSD module can be installed
during operation (hot-plug), see "Removing 2.5-inch HDD/SSD
modules" on page
142.
Preliminary steps
â–¶
If applicable,
"Removing the front cover with lock" on page 48.
â–¶
Identify the physical location of the PCIe SSD module, see "2.5-inch HDD/
SSD configurations" on page
138.
â–¶
Prepare the removing of the PCIe SSD module.
â–¶
Depending on your configuration and OS: "Shutting down the server" on
page 48.
Hard disk drive (HDD) / solid state disk (SSD)
RX2530 M6 Upgrade and Maintenance Manual 149
To Next Page
Loading...
Need help?
General