●
iRMC microSD card
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC.
●
M.2 SSD
The system board of
fers two M.2 slots (Key M) with support 80 mm and
110
mm long M.2 SSDs. With the M.2 SSD an internal SSD is offered. This
SSD can be configured as a boot device or data storage device.
●
Dual microSD 64GB Enterprise
The system board is optionally equipped with a Dual microSD 64GB
Enterprise. The Dual microSD 64GB Enterprise offers an Integrated
Hardware RAID solution based on RAID-on-Chip (ROC) technology.
●
VROC module
The VROC module is necessary for using the VROC functionality. VROC
provides RAID solutions for NVMe SSDs and SATA devices.
16.3 CMOS battery
16.3.1 Replacing the CMOS battery
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: – Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– recommended: tooth pick (CMOS battery)
For this server the battery type CR2450 is used.
System board and components
346 Upgrade and Maintenance Manual RX2530 M6
To Next Page
Loading...
Need help?
General