Fujitsu PRIMERGY RX2530 M6 User Manual

▶
If applicable, "Installing the front cover with lock" on page 66.
▶
Configure the new MAC address in the OS, if you have no VIOM
(ServerV
iew Virtual-IO Manager) installed. If you have VIOM installed, it is
not necessary to configure the MAC address. This is virtualized by VIOM.
▶
Inform the customer about new MAC addresses. For more information, see
"Looking for MAC/WWN/GUID and SAS addresses" on page 95.
▶
"Updating the NIC configuration file in a Linux and VMware environment" on
page 92.
▶
"Configuring LAN teaming" on page 100.
9.5.3 Removing an OCP module
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
Preliminary steps
▶
If applicable, "Removing the front cover with lock" on page 48.
▶
"Shutting down the server" on page
48.
▶
"Disconnecting the power cord" on page 49.
Expansion cards and backup units
214 Upgrade and Maintenance Manual RX2530 M6

Fujitsu PRIMERGY RX2530 M6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX2530 M6
Category	Server
Language	English