Fujitsu PRIMERGY RX2530 M6 User Manual

▶
Install the new Dual microSD 64GB Enterprise, see "Installing the Dual
microSD 64GB Enterprise" on page 373.
Concluding steps
▶
Install the riser module 1, see "Installing a riser module" on page
69.
▶
"Reassembling" on page 57.
▶
"Connecting the power cord" on page 62.
▶
"Switching on the server" on page 66.
▶
If applicable, "Installing the front cover with lock" on page 66.
▶
Rebuild will start automatically, see "Performing a RAID array rebuild" on
page 94.
Software configuration
To install the ESXi to the Dual microSD 64GB Enterprise, see "Software
configuration" on page 375.
16.7.5 Replacing the microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Preliminary steps
▶
"Locating the defective server" on page 45.
▶
If applicable, "Removing the front cover with lock" on page
48.
▶
"Shutting down the server" on page 48.
▶
"Disconnecting the power cord" on page 49.
▶
"Getting access to the component" on page 52.
System board and components
380 Upgrade and Maintenance Manual RX2530 M6

Fujitsu PRIMERGY RX2530 M6 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX2530 M6
Category	Server
Language	English