2.1.3 Installing optional components
The operating manual of your server gives an introduction to server features
and provides an overview of available hardware options.
Use the Fujitsu ServerView Suite management software and the iRMC S5 web
interface to prepare hardware expansions. For more information about
ServerView Suite documentation, see "Documentation overview" on page
28.
Please see the following ServerView Suite topics:
–
Operation
–
Virtualization
–
Maintenance
–
Out-Of-Band Management
For the latest information on hardware options, see the hardware
configurator of your server
, available online at the following address:
https://www
.fujitsu.com/fts/products/computing/servers/primergy/
index.html
For Japan:
https://www
.fujitsu.com/jp/products/computing/servers/primergy/
Please contact your local Fujitsu customer service partner for details on how to
order expansion kits or spare parts.
2.1.4 Replacing a defective component
The Global Error indicator on the front of the server reports defective hardware
components that need to be replaced. For more information on the controls
and indicators of your server, see the operating manual of your server and
"Connectors and indicators" on page
406.
If the system has been powered off in order to replace a non-hot plug unit, a
system of PRIMERGY diagnostic indicators guides you to the defective
component. The "Indicate CSS" button enables the indicator next to the
defective component even if the server has been switched off and
disconnected from the mains. For more information, see "Using diagnostic
information" on page 45 and "Indicators on the COP" on page 412.
Before you start
22 Upgrade and Maintenance Manual RX2530 M6
To Next Page
Loading...
Need help?
General