EasyManuals Logo
Home>Fujitsu>Server>PRIMERGY RX2530 M6

Fujitsu PRIMERGY RX2530 M6 User Manual

Fujitsu PRIMERGY RX2530 M6
486 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #360 background imageLoading...
Page #360 background image
"Switching on the server" on page 66.
If applicable,
"Installing the front cover with lock" on page 66.
"Resuming BitLocker functionality" on page 93.
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
16.5 iRMC microSD card
16.5.1 Note for embedded Lifecycle Management (eLCM)
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key from user purchase order and activated through the iRMC
web interface.
For more information, see the “ServerView embedded Lifecycle
Management (eLCM)” user guide.
16.5.2 Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Preliminary steps
If applicable, "Removing the front cover with lock" on page 48.
"Shutting down the server" on page
48.
"Disconnecting the power cord" on page 49.
"Getting access to the component" on page 52.
System board and components
360 Upgrade and Maintenance Manual RX2530 M6

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY RX2530 M6 and is the answer not in the manual?

Fujitsu PRIMERGY RX2530 M6 Specifications

General IconGeneral
BrandFujitsu
ModelPRIMERGY RX2530 M6
CategoryServer
LanguageEnglish

Related product manuals