GE Giraffe OmniBed Carestation CS1 Service Manual

7-1
Chapter 7: Repair Procedures
7.1 Canopy Removal for Service
1. Lock the rails in the intermediate position:
a. Raise the canopy.
b. Slowly lower the canopy until the rail locking screws align with the horizontal oblong holes in the
rails.
c. Use a 4 mm hex key to turn the rail locking screws counter-clockwise until they lock both rails in
place.
2. Lower the elevating base to a convenient height for reaching the canopy.
3. Switch off the device and disconnect the power cord.
4. Cover the bed with a sheet to catch any parts that may fall.
SENSITIVE TO ELECTROSTATIC DISCHARGE CAUTION
An Electrostatic Discharge (ESD) Susceptibility symbol is displayed to alert service personnel that
the part(s) are sensitive to electrostatic discharge and that static control procedures must be
used to prevent damage to the equipment.
!
Warning: After performing any repair or calibration, always perform the Service Checkout
Procedure before putting the device back into service.

GE Giraffe OmniBed Carestation CS1 Specifications

General

Brand	GE
Model	Giraffe OmniBed Carestation CS1
Category	Medical Equipment
Language	English