Files 94
File name/Diskette file name
The File name /Diskette file name is the name of the file to load from disk/diskette/memory stick. To
remove a file, highlight the file name and double click on the touch screen where indicated.
Keypad operation: To remove using a keyboard, use the – key.
Preview
When checked, the Preview checkbox allows the file that is selected in the Files list box to be
previewed.
Load to
The Load to list selects whether you load to the current part or to a directory on the hard disk. To
add or remove a directory, double click on the touch screen where indicated.
Keypad operation: To select a different directory, use the and keys on the keyboard. To add a
new directory, use the + key on the keyboard. To remove a directory, use the - key on the keyboard.
Note: This selection is only available if loading from the Diskette or USB memory stick.
Hard drive file name
The Hard drive file name is the name that you are giving the file you are loading on the hard drive.
Note: This selection is only available if loading from the Diskette or USB memory stick.
Resume Last Part
The Resume Last Part soft key will be visible when the Rush Job Interrupt or Automated Power Loss
Recovery feature is in use. These features allow the user to pause the current part program and
retain the part and current position information. This then allows the user to load and execute
another part program and return to the original part using the Resume Last Part soft key.
Show Certain Files
This soft key allows the operator to search the selected folder for specific part files by using wildcard
type search tools. Both the asterisk (*) and question mark (?) can be used.
Keypad operation: To input the asterisk when using a keyboard, press the left shift key (purple) and
the backspace key. To input the question mark, press the right shift key (blue) and the backspace
key.
Show All Files
This will allow the operator to switch from the selected “certain files” to viewing all files with the
predetermined file extensions.
Resume Last Part Features
Rush Job Interrupt
Rush Job Interrupt allows the user to pause the current part program and retain the part and current
position information. When at the Pause screen, press the Cancel key. A prompt will appear on
screen to ask the user if they wish to save the part information for later use.
To Next Page
Loading...
Need help?
General
