Sensor™ THC 388
Process Watch
Input/Output
In addition to the standard I/O options, the Watch window may be configured to include the status of
the voltage tracking for the Sensor™ THC. This will indicate when the automated voltage tracking
has “Locked On” and is adjusting the torch height based on voltage.
Position
The Sensor™ THC is operated as a separate axis on the control. Position information for the THC
axis may be displayed in the Watch window.
Plasma Process
Information critical to the THC operation may be added to the Lower Location. This information
includes the Actual Arc Voltage, the Set Arc Voltage, Initial Cut Height and Pierce Delay. Values for
the Set Arc Voltage, Initial Cut Height and Pierce Delay maybe adjusted at the main screen to
customize the cut process.
To Next Page
Loading...
Need help?
General
