Overview 4
Program Upload and Download
Communication is an integral part of today‟s fabricating shop. All part programs that have been
entered in the control can be uploaded to a remote computer or file server with an integrated RS-
232C/ RS-422 communications link. CAD generated programs can be downloaded at baud rates of
up to 115K baud and visually previewed on the color LCD display. Visual representation of part
programs, along with full alpha-numeric file name support, gives you the flexibility to manage your
data as you see fit. Use of the optional Network Card allows us to bring the latest in communication
technology for increased speed and productivity to your shape cutting controller. Additionally, built-in
Control monitoring features allow current operational status to be displayed at the host Link screen.
SoftMotion
SoftMotion, a proprietary data buffer and interrupt structure that allows the control to generate all of
its motion control algorithms from the main Pentium
®
Processor. This architecture allows SoftMotion
to tightly couple the motion control and I/O logic to the operator interface.
Cutting Options
Flexibility in your cutting operation is the key to success. The control comes standard with the
following cutting functions to help you optimize material and plate usage. These functions work on
any program. After selecting one of these functions, the new part will be graphically displayed.
Mirror function
The mirror function can be used to create a mirror image of the part along either the X or Y-axis.
Rotate function
The rotate function can be used to rotate the current part.
Scale function
The scale function can be used to increase or decrease the current part by a programmed ratio.
Repeat function
The repeat function duplicates the part shape in either a straight, staggered or nested grid patterns.
Programming Features
English and Metric operation for worldwide use. Each axis can have its own encoder-to-unit edge
rate.
Dynamic Kerf compensation with programmable kerf value.
Automatic Corner and Plate Alignment with programmable scrap clearance.
Shape Repeat with three grid patterns (straight, stagger, and nested) allows fast cutting of multiple
pieces.
To Next Page
Loading...
Need help?
General
