The Voyager III™ PC based CNC control for the
metal cutting industry utilizes our proprietary
Graphical User Interface (GUI) and SoftMotion
Technology. Voyager III provides the user with
increased performance and greater operational
flexibility utilizing a 15” touch screen display, 2.4Ghz
Intel processor, proprietary operational software and
a unique SERCOS/Analog machine interface.
Common applications for Voyager class controls
include: bevel head systems, multiple Sensor Torch
Height Controls and other advanced systems
requiring more than four axes for machine
interfacing.
Touch Screen
The 15” display used in the Voyager III is a patented
IntelliTouch Surface Wave technology which
provides precise drift free touch accuracy and
unsurpassed clarity. Pure glass construction with
tiny transducers on the back of the touch screen
preserves color purity and works even if scratched.
There is no known wear out mechanism as there are
no layers, coatings or moving parts. IntelliTouch
technology has been tested by the supplier for more
than 50 million touches in one location without
failure.
THC, Joystick & Speedpots
Optional features for Sensor THC, Joystick and
Speedpots are offered.
Note: Use of some devices such as USB memory
devices may require loading of a device driver for
operation. Many standard device drivers are located
in the C:\CABS or D:\CABS\I386 folders.
Operation and maintenance of automated equipment
involves potential hazards. Personnel should take
precautions to avoid injury. This equipment should
only be opened by trained service personnel.
To Next Page
Loading...
Need help?
General
