Mariner ™ offers motion control operation of up to
12 axes with 1024 I/O signals with SERCOS™
Interface, providing a high degree of flexibility in
operation and table configurations. This control
system supports Multiple Sensor™ Torch Height
Controls, Tilt/Rotate, Dual Tilt/Rotate and Dual
Transverse motion axes along with direct
communication to Hypertherm‟s HD3070
®
HyDefinition
®
Autogas Console, HD4070
®
HyDefinition
®
and HPR™ Plasma systems. A
unique Laser process screen directly integrates to
Hypertherm‟s FASTLaser head. This product uses
type “V” software.
Touch Screen
The 15” display used in the Mariner control is a
patented IntelliTouch Surface Wave technology
which provides precise drift free touch accuracy and
unsurpassed clarity. Pure glass construction with
tiny transducers on the back of the touch screen
preserves color purity and works even if scratched.
There is no known wear out mechanism as there
are no layers, coatings or moving parts. IntelliTouch
technology has been tested by the supplier for more
than 50 million touches in one location without
failure.
THC, Joystick & Speedpots
Features for Sensor THC, Joystick and Speedpots
are provided as standard. Connection and
operation information is provided in the Operators
and Installation Guide provided with this product.
Note: Use of some devices such as USB memory
devices may require loading of a device driver for
operation. Many standard device drivers are
located in the C:\CABS or D:\CABS\I386 folders.
To Next Page
Loading...
Need help?
General
