Hypertherm MicroEdge User Manual

Manual 278
CBH
Pressing the CBH soft key causes the automated homing procedure to be executed. This procedure
generally produces machine motion in the CBH axis, depending on the homing parameters set in the
Setups.
THC
Pressing the THC soft key causes the automated homing procedure for the Sensor™ THC to be
executed. This procedure generally produces machine motion in the THC axis, depending on the
homing parameters set in the Setups.
Tilt
Pressing the Tilt soft key causes the automated homing procedure for the Tilt Axis to be executed.
Rotate
Pressing the Rotate soft key causes the automated homing procedure for the Rotate Axis to be
executed.
Note: If Tilt and Rotate Axes are enabled, the following window will appear to allow access to the Tilt/
Rotate or other axes.
Selecting “Yes” will access Homing for the Tilt and Rotate Axes. Selecting “No will access the
Homing functions for the other axes,
All
Pressing the All soft key causes the automated homing procedure to be executed. This procedure
generally produces machine motion in one or more axes, depending on the homing parameters set in
the Setups.
Go To Home Position
Pressing one of the four Go To Home Position soft keys causes the Transverse and Rail axes to
move to the predefined position set in the corresponding edit window. The Go To Positions are
absolute and require that an automated home procedure be executed previously.

Hypertherm MicroEdge Specifications

General

Brand	Hypertherm
Model	MicroEdge
Category	Control Systems
Language	English